Prof. Dr.-Ing.  Dimosthenis Trimis

Prof. Dr.-Ing. Dimosthenis Trimis

  • Engler-Bunte-Ring 7
    76131 Karlsruhe

Career and Education

Year Career
since 09/2013 Head of the Chair of Combustion Technology at the Karlsruhe Institute of Technology
2017 - 2019 Chief Executive Officer of DVGW Research Center at Engler-Bunte-Institut of Karlsruhe Institute of Technology, Germany
2007 - 2015 Chief Executive Officer of DBI-GTI gGmbH (Institute of Gas Technology Freiberg, Associated Institute of the TU Bergakademie Freiberg, Germany)
02/2006 - 08/2013 Head of the Chair of Gas and Heat Technology at the TU Bergakademie Freiberg, Germany
1998 - 2006 Head of Research Division E2 Flows with chemical reactions at the Institute of Fluid Mechanics, FAU Erlangen-Nuremberg, Germany
1996 - 1997 Head of Research Group Combustion Technology at the Institute of Fluid Mechanics, FAU Erlangen-Nuremberg, Germany
1992 - 1995 Scientific assistant at the Institute of Fluid Mechanics, FAU Erlangen-Nuremberg, Germany
Year Education and Awards
2019 - 2020 Visiting professor at the PoliTo (Politecnico di Torino), Italy
2013 - 2018 Honorary professor of Gas and Heat Technology at the TU Bergakademie Freiberg
2001 Wilhelm-Jost-Medal of the German section of the Combustion Institute (together with Dr. K. Lucka, RWTH-Aachen)
1998 Italgas Research Price (12th Edition, together with Prof. Dr. Dr. h.c. F. Durst)
1995 Ph.D. (Dr.-Ing.) at University of Erlangen.
1990 - 1992 DAAD - scholarship
1990 Dipl.-Ing. (M.Sc.) Mechanical Engineering NTUA, Athens
1979 - 1985 Graduation (Abitur) at the German school of Athens

Publikationen 2023


Engler-Bunte-Institut des Karlsruher Instituts für Technologie (KIT) im Jahr 2022
Kolb, T.; Trimis, D.; Horn, H.
2023. GWF, Wasser - Abwasser, 2023 (6), 69 – 80
Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames
Weis, C.; Sentko, M.; Stelzner, B.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2023. 4th Oxyflame Workshop
Bestimmung der laminaren Brenngeschwindigkeit von Eisenstaub-Luft Flammen
Fedoryk, M.; Stelzner, B.; Harth, S.; Trimis, D.
2023. Jahrestreffen der DECHEMA Fachgruppe Hochtemperaturtechnik, Karlsruher Institut für Technologie (KIT)
Simulation eines industriellen Brenners zur thermischen Nachverbrennung mit Lösemittel beladener Luft hinsichtlich der Brenngassubstitution von Erdgas durch Wasserstoff
Weis, C.; Habisreuther, P.; Athenstädt, C.; Wahl, E.; Trimis, D.
2023. Jahrestreffen der DECHEMA Fachgruppe Hochtemperaturtechnik
Laminar burning velocity measurements and stability map determination of Fe-N2/O2 mixtures in a tube burner
Fedoryk, M.; Stelzner, B.; Harth, S.; Trimis, D.
2023. Proceedings : 11th European Combustion Meeting 2023
Combustion characteristics of iron-air suspensions: reaction zone structures and reaction front speed
Braig, D.; Fedoryk, M. A.; Mich, J.; Harth, S. R.; Stelzner, B.; Scholtissek, A.; Trimis, D.; Hasse, C.
2023. 31. Deutscher Flammentag (2023), Berlin, Germany, September 27–28, 2023
Linking carbon nanostructure, optical properties, volume fraction, and size distribution of carbon nanoparticles formed in premixed flames
Bauer, M.; Hagen, F.; Kretzler, D.; Schulz, S.; Stelzner, B.; Bockhorn, H.; Suntz, R.; Trimis, D.
2023. 31. Deutscher Flammentag (2023), Berlin, Germany, September 27–28, 2023
Development of a model burner for turbulent premixed hydrogen-air combustion at high exhaust gas recirculation (EGR) rates
Schneider, M.; Bauer, M.; Schulz, S.; Habisreuther, P.; Weis, C.; Stelzner, B.; Trimis, D.
2023. 31. Deutscher Flammentag (2023), Berlin, Germany, September 27–28, 2023
Investigation of the laminar burning velocity of premixed H2-air flames highly diluted with exhaust gas using the heat-flux burner method
Schneider, M.; Bauer, M.; Habisreuther, P.; Weis, C.; Stelzner, B.; Trimis, D.
2023. Proceedings of the 11th European Combustion Institute Meeting - 2023 Proceedings of the European Combustion Meeting 2023, 1–6. doi:10.5445/IR/1000165131
Improving volume-averaged simulations of matrix-stabilized combustion through direct X-ray µCT characterization: Application to NH₃/H₂-air combustion
Zirwes, T.; Vignat, G.; Toro, E. R.; Boigné, E.; Younes, K.; Trimis, D.; Ihme, M.
2023. Combustion and Flame, 257 (2), Article no: 113020. doi:10.1016/j.combustflame.2023.113020
Manufacturing of a Burner Plate by Diffusion Bonding to Investigate Premixed Fuel‐Rich Oxy‐Fuel Flames at Increased Pressure and Preheating
Gietzelt, T.; Sentko, M. M.; Stelzner, B.; Trimis, D.
2023. Chemical Engineering and Technology, 46 (7), 1533–1538. doi:10.1002/ceat.202200442
On-line monitoring of carbon nanostructure and soot reactivity in engine exhaust by dual-pulse laser-induced incandescence
Hagen, F. P.; Kretzler, D.; Koch, S.; Bockhorn, H.; Suntz, R.; Trimis, D.; Kubach, H.; Velji, A.; Koch, T.
2023. Combustion and Flame, 254, Art.-Nr.: 112850. doi:10.1016/j.combustflame.2023.112850
Numerical investigation of an innovative furnace concept for industrial coil coating lines
Barata, B. A. C.; Dias, B. S.; Navalho, J. E. P.; Schneider, M.; Weinbrecht, P.; Weis, C.; Trimis, D.; Pereira, J. C. F.
2023. Thermal Science and Engineering Progress, 42, Art.-Nr.: 101843. doi:10.1016/j.tsep.2023.101843
Effect of nozzle up-scaling on coaxial, gas-assisted atomization
Zhang, F.; Wachter, S.; Zirwes, T.; Jakobs, T.; Zarzalis, N.; Trimis, D.; Kolb, T.; Stapf, D.
2023. Physics of Fluids, 35 (4), Art.-Nr.: 043302. doi:10.1063/5.0141156
Particle and Phase Analysis of Combusted Iron Particles for Energy Storage and Release
Buchheiser, S.; Deutschmann, M. P.; Rhein, F.; Allmang, A.; Fedoryk, M.; Stelzner, B.; Harth, S.; Trimis, D.; Nirschl, H.
2023. Materials, 16 (5), 2009. doi:10.3390/ma16052009
Experimental and numerical investigation of flame stabilization and pollutant formation in matrix stabilized ammonia-hydrogen combustion
Vignat, G.; Zirwes, T.; Toro, E. R.; Younes, K.; Boigné, E.; Muhunthan, P.; Simitz, L.; Trimis, D.; Ihme, M.
2023. Combustion and Flame, 250, Article no: 112642. doi:10.1016/j.combustflame.2023.112642
Experimental investigation of the laminar burning velocity of iron-air flames in a tube burner
Fedoryk, M.; Stelzner, B.; Harth, S.; Trimis, D.
2023. Applications in Energy and Combustion Science, 13, Art.Nr. 100111. doi:10.1016/j.jaecs.2022.100111
Numerical simulations of air-assisted primary atomization at different air-to-liquid injection angles
Zhang, F.; Zirwes, T.; Wachter, S.; Jakobs, T.; Habisreuther, P.; Zarzalis, N.; Trimis, D.; Kolb, T.; Bockhorn, H.; Stapf, D.
2023. International journal of multiphase flow, 158, Art.-Nr.: 104304. doi:10.1016/j.ijmultiphaseflow.2022.104304
Soot nanoparticle sizing in counterflow flames using in-situ particle sampling and differential mobility analysis verified with two-colour time-resolved laser-induced incandescence
Hagen, F. P.; Vlavakis, P.; Seitz, M.; Klövekorn, T.; Bockhorn, H.; Suntz, R.; Trimis, D.
2023. Proceedings of the Combustion Institute, 39 (1), 1119–1128. doi:10.1016/j.proci.2022.07.253

Publications in 2022


Numerical simulations of iron particle dispersion in a fan stirred closed vessel
Heidarifatasmi, H.
2022, July. Jahrestagung des KIT-Zentrums Energie (2022), Karlsruhe, Germany, July 14–15, 2022
A Pilot Scale Demo Line for Continuous Energy Efficient Coil Coating
Weinbrecht, P.; Schneider, M.; Wieland, C.; Weis, C.; Trimis, D.
2022, September 14. (Bio-)Process Engineering - a Key to Sustainability (2022), Aachen, Germany, September 12–15, 2022
Eine Pilotanlage zur energieeffizienten Stahlbandbeschichtung
Weis, C.; Weinbrecht, P.; Schneider, M.; Wieland, C.; Trimis, D.
2022, March 30. Jahrestreffen der ProcessNet-Fachgruppen "Abfallbehandlung und Wertstoffrückgewinnung, Energieverfahrenstechnik, Gasreinigung, Hochtemperaturtechnik, Rohstoffe" (2022), Bamberg, Germany, March 30–April 1, 2022
Correlation of heat loss with quenching distance during transient flame-Wall interaction
Zhang, F.; Zirwes, T.; Häber, T.; Bockhorn, H.; Trimis, D.; Suntz, R.; Stapf, D.
2022. Proceedings of the Combustion Institute, 39 (2), 2037–2045. doi:10.1016/j.proci.2022.10.010
Characterization of Flame Behavior and Blowout Limits at Different Air Preheating Temperatures in Plasma Assisted Stabilized Combustor
De Giorgi, M. G.; Mehdi, G.; Bonuso, S.; Shamma, M.; Harth, S.; Trimis, D.; Zarzalis, N.
2022. Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. Volume 3B: Combustion, Fuels, and Emissions, Art.-Nr.:V03BT04A048, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-83239
Correlation of heat loss with quenching distance during transient flame-wall Interaction
Zhang, F.
2022, July. 39th International Symposium on Combustion (2022), Vancouver, Canada, July 24–29, 2022
3D direct pore level simulations of radiant porous burners
Wieland, C.; Weis, C.; Habisreuther, P.; Trimis, D.
2022. Combustion and Flame, 245, Art.-Nr.: 112370. doi:10.1016/j.combustflame.2022.112370
Dynamics of Premixed Hydrogen/Air Flames in Unsteady Flow
Zhang, F.; Zirwes, T.; Wang, Y.; Chen, Z.; Bockhorn, H.; Trimis, D.; Stapf, D.
2022. Physics of Fluids, 34 (8), Art.-Nr.: 085121. doi:10.1063/5.0098883
Resolvent-based modelling of coherent structures in a turbulent jet flame using a passive flame approach
Casel, M.; Oberleithner, K.; Zhang, F.; Zirwes, T.; Bockhorn, H.; Trimis, D.; Kaiser, T. L.
2022. Combustion and Flame, 236, Art.-Nr.: 111695. doi:10.1016/j.combustflame.2021.111695
Enhancement of Blowout Limits in Lifted Swirled Flames in Methane-Air Combustor by the Use of Sinusoidally Driven Plasma Discharges
De Giorgi, M. G.; Bonuso, S.; Mehdi, G.; Shamma, M.; Harth, S. R.; Zarzalis, N.; Trimis, D.
2022. Active Flow and Combustion Control 2021 : papers contributed to the Conference “Active Flow and Combustion Control 2021”, September 28-29, 2021, Berlin, Germany.Ed.: R. King, 66–82, Springer International Publishing. doi:10.1007/978-3-030-90727-3_5
Influence of Global Operating Parameters on the Reactivity of Soot Particles from Direct Injection Gasoline Engines
Koch, S.; Hagen, F. P.; Büttner, L.; Hartmann, J.; Velji, A.; Kubach, H.; Koch, T.; Bockhorn, H.; Trimis, D.; Suntz, R.
2022. Emission Control Science and Technology, 8 (1-2), 9–35. doi:10.1007/s40825-022-00211-y
A CFD Study of the Performance of Horizontal Dilution Tubes
Mätzing, H.; Vlavakis, P.; Trimis, D.; Stapf, D.
2022. 13th European Conference on Industrial Furnaces and Boilers (INFUB13), April 19-22, 2022, Algarve, P
A CFD Study of the Performance of Horizontal Dilution Tubes
Mätzing, H.; Vlavakis, P.; Trimis, D.; Stapf, D.
2022, April 21. 13th European Conference on Industrial Furnaces and Boilers (INFUB 2022), Albufeira, Portugal, April 19–22, 2022
Experimental investigation of the effect of hydrogen addition on the sooting limit and structure of methane/air laminar counterflow diffusion flames
Khare, R.; Vlavakis, P.; Langenthal, T. V.; Loukou, A.; Khosravi, M.; Kramer, U.; Trimis, D.
2022. Fuel, 324/B, Art.-Nr.: 124506. doi:10.1016/j.fuel.2022.124506
Numerical Study on Flame Stabilization and NO Formation in a Novel Burner System for Sulfur Combustion
Zhang, F.; Kurjata, M.; Sebbar, N.; Zirwes, T.; Fedoryk, M.; Harth, S.; Wang, R.; Habisreuther, P.; Trimis, D.; Bockhorn, H.
2022. Energy and Fuels, 36 (7), 4094–4106. doi:10.1021/acs.energyfuels.1c04007
Simultaneous Compression and Absorption for Energy‐Efficient Dissolution of Gases in Liquid
Giakoumatou, E.; Goßmann, A.-K.; Stelzner, B.; Trimis, D.
2022. Chemie - Ingenieur - Technik, 94 (3), 309–313. doi:10.1002/cite.202100153
Turbulent impinging jets on rough surfaces
Secchi, F.; Häber, T.; Gatti, D.; Schulz, S.; Trimis, D.; Suntz, R.; Frohnapfel, B.
2022. GAMM Mitteilungen, 45 (1), e202200005. doi:10.1002/gamm.202200005
Experimental investigation of synthesis gas production in fuel-rich oxy-fuel methane flames
Sentko, M. M.; Schulz, S.; Weis, C.; Stelzner, B.; Anderlohr, C.; Vicari, M.; Trimis, D.
2022. Fuel, 317, Art.-Nr.: 123452. doi:10.1016/j.fuel.2022.123452

Publications before 2015


2014
Study of the evolution of soot particle size distributions in premixed iso-octane/ethanol flames
Frenzel, I.; Salenbauch, S.; Hasse, C.; Trimis, D.
2014. 35th International Symposium on Combustion, WIP-Poster, San Francisco, U.S.A., August 2014
Modeling soot formation in premixed flames using a conditional quadrature method of moments (CQMOM) approach
Salenbauch, S.; Cuoci, A.; Frenzel, I.; Trimis, D.; Faravelli, T.; Hasse, C.
2014. 35th International Symposium on Combustion, WIP-Poster, San Francisco, U.S.A., August 2014
Study on the influence of ethanol on soot formation in premixed ethylene flames
Frenzel, I.; Trimis, D.
2014. 2nd International Sooting Flame Workshop, Pleasanton, U.S.A., August 2014
Experimental and numerical investigation of methane partial oxidation in a small-scale porous media reformer
Loukou, A.; Mendes, M.; Frenzel, I.; Pereira, J. M. C.; Pereira, J. C. F.; Trimis, D.
2014. 35th International Symposium on Combustion, WIP-Poster, San Francisco, U.S.A., August 2014
Experimental study on the characteristics of soot particles formed in laminar premixed ethylene flames
Frenzel, I.; Salenbauch, S.; Hasse, C.; Trimis, D.
2014. Conference on Aerosol Technology, Karlsruhe, Deutschland, Juni 2014
Study on the influence of ethanol on the soot formation in premixed ethylene flames
Frenzel, I.; Trimis, D.
2014. 18th Conference on Combustion Generated Nanoparticles, Poster, Zürich, Schweiz, Juni 2014
Measurements and numerical study of laminar burning velocities of iso-butanol and ethanol blends
Rau, F.; Hartl, S.; Voss, S.; Hasse, C.; Trimis, D.
2014. 3rd Heat Flux Burner Workshop, 25. September 2014, Berlin
Measurements and numerical study of laminar burning velocities of iso-butanol and ethanol blends
Rau, F.; Hartl, S.; Voss, S.; Hasse, C.; Trimis, D.
2014. Measurements and numerical study of laminar burning velocities of iso-butanol and ethanol blends
Untersuchung einer Modellflamme für Vergasungsprozesse von schwierigen Kohlen unter erhöhtem Druck - Experimentelle und numerische Untersuchung der Flammenzone an einer inversen CH4/C02-02-Diffusionsflamme
Stelzner, B.; Hunger, F.; Voss, S.; Hasse, C.; Trimis, D.
2014. Verbrennung und Feuerung : 26. Deutscher Flammentag, Duisburg, 11. und 12. September 2013, 527–536, VDI Verlag
Development of an autothermal biogas processor for hydrogen production
Herrmann, A.; Pönisch, M.; Werzner, E.; Laurinat, M.; Rezaei, E.; Ortona, A.; Bensaid, S.; Fino, D.; Trimis, D.
2014. Gas innovations inspiring clean energy - International Gas Union Research Conference (IGRC 2014), Copenhagen, Denmark, 17-19 September 2014. Vol.: 2, 1257–1267, Curran
Potential of unwanted pre-reactions of LPG during the reforming processes in fuel cell CHP
Anger, S.; Nitzsche, J.; Krause, H.; Trimis, D.
2014. International Gas Research Conference Proceedings. Vol. 1, 405–415
Potential of thermally integrated high-temperature electrolysis and methanation for the storage of energy by Power-to-Gas
Anger, S.; Trimis, D.
2014. International Gas Research Conference Proceedings. Vol. 3, 2452–2465
Measurement of laminar burning velocities of fuel-rich methane-oxygen mixtures
Weis, C.; Sentko, M. M.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2014. 3rd Heat Flux Burner Workshop, Berlin, September 25th, 2014. Innerhalb von: Flame Structure 2014, 8th International Seminar on Flame Structure, 21.-24. Sept. 2014, Berlin
SiSiC heat exchangers for recuperative gas burners with highly structured surface elements
Ortona, A.; Trimis, D.; Uhlig, V.; Eder, R.; Gianella, S.; Fino, P.; D’Amico, G.; Boulet, E.; Chazelas, C.; Grämer, T.; Cresci, E.; Wünning, J. G.; Altena, H.; Beneke, F.; Debier, M.
2014. International journal of applied ceramic technology, 11 (5), 927–937. doi:10.1111/ijac.12087
Experimental validation of simplified conduction-radiation models for evaluation of Effective Thermal Conductivity of open-cell metal foams at high temperatures
Mendes, M. A. A.; Skibina, V.; Talukdar, P.; Wulf, R.; Gross, U.; Trimis, D.; Ray, S.
2014. International Journal of Heat and Mass Transfer, 78, 112–120. doi:10.1016/j.ijheatmasstransfer.2014.05.058
An improved model for the effective thermal conductivity of open-cell porous foams
Mendes, M. A. A.; Ray, S.; Trimis, D.
2014. International Journal of Heat and Mass Transfer, 75 (8), 224–230. doi:10.1016/j.ijheatmasstransfer.2014.02.076
Evaluation of effective thermal conductivity of porous foams in presence of arbitrary working fluid
Mendes, M. A. A.; Ray, S.; Trimis, D.
2014. International Journal of Thermal Sciences, 79, 260–265. doi:10.1016/j.ijthermalsci.2014.01.009
Numerical prediction of effective thermal conductivity of refractory materials
Zehmisch, R.; Demuth, C.; Al-Zoubi, A.; Mendes, M. A. A.; Ballani, F.; Ray, S.; Trimis, D.
2014. Journal of Ceramic Science and Technology, 5 (2), 145–154. doi:10.4416/JCST2013-00041
Experimental and numerical determination of effective thermal conductivity of open cell FeCrAl-alloy metal foams
Wulf, R.; Mendes, M. A. A.; Skibina, V.; Al-Zoubi, A.; Trimis, D.; Ray, S.; Gross, U.
2014. International Journal of Thermal Sciences, 86, 95–103. doi:10.1016/j.ijthermalsci.2014.06.030
Design and synthesis of stable supported-CaO sorbents for CO2 capture
Amos, N. J.; Widyawati, M.; Kureti, S.; Trimis, D.; Minett, A. I.; Harris, A. T.; Church, T. L.
2014. Journal of Materials Chemistry A, 2, 4332–4339. doi:10.1039/C3TA14953F
Numerical simulation of complete liquid-vapour phase change process inside porous media using smoothing of diffusion coefficient
Alomar, O. R.; Mendes, M. A. A.; Trimis, D.; Ray, S.
2014. International Journal of Thermal Sciences, 86, 408–420. doi:10.1016/j.ijthermalsci.2014.08.003
Engler-Bunte-Institut des Karlsruher Instituts für Technologie (KIT) und TZW: DVGW-Technologiezentrum Wasser, im Jahre 2013
Horn, H.; Klinger, J.; Kolb, T.; Trimis, D.
2014. GWF: Wasser, Abwasser, (6), 760–774
2013
Biogas yields from food waste subject to different mechanical pre-treatments
Rusconi Clerici, P.; Paraboschi, A.; Frenzel, I.; Ferchau, E.; Wesolowski, S.; Trimis, D.
2013. Proceedings Sardinia 2013, Fourteenth International Waste Management and Landfill Symposium, Cagliari, I, Sep 30 - Oct 4, 2013
Numerical and Experimental Investigation of Soot Formation and Particle Size Distributions in Laminar Premixed C2H4 Flames
Salenbauch, S.; Frenzel, I.; Trimis, D.; Hasse, C.
2013. COST Action CM0901 IV Annual Meeting, Perugia, I, 16.-18. September 2013
Numerische und experimentelle Untersuchung der Rußbildung und Partikelgrößenverteilung in laminaren Vormischflammen
Salenbauch, S.; Frenzel, I.; Trimis, D.; Hasse, C.
2013. Verbrennung und Feuerung : 26. Deutscher Flammentag, Duisburg, 11. und 12. September 2013, 881–884, VDI Fachmedien
Experimental and numerical study of the evolution of soot particle size distributions in premixed C2 hydrocarbon flames
Frenzel, I.; Salenbauch, S.; Hasse, C.; Trimis, D.
2013. European Combustion Meeting, 25.-28. June 2013, Lund/Sweden
Numerical and Experimental Investigation of Soot Formation and Particle Size Distributions in Laminar Premixed Flames
Salenbauch, S.; Frenzel, I.; Trimis, D.; Hasse, C.
2013. Joint Working Group Meeting Soot and PAHs (COST Workshop CM0901), Sorrento, I, 11.-12. April 2013
Experimentelle Charakterisierung eines neuen zweistufigen Brennerkonzeptes für die Umsetzung von Anodenrestgasen in Brennstoffzellensystemen
Frenzel, I.; Loukou, A.; Trimis, D.
2013. Jahrestreffen Hochtemperaturtechnik und Technische Reaktionen, 26.-27. Februar 2013, Oberhausen/Deutschland
Temperature effects on the laminar burning velocity of different ethanol/iso-octane blends
Hartl, S.; Rau, F.; Voss, S.; Hasse, C.; Trimis, D.
2013. 2nd COST workshop, Lund, Sweden, June 2013
Measurements and Numerical Study of Laminar Burning Velocities of Iso-octane and Ethanol Blends
Rau, F.; Hartl, S.; Voss, S.; Hasse, C.; Trimis, D.
2013. 6th European Combustion Meeting 2013, Lund, S, June 25-28, 2013
Flame structure analysis of oxygen-enhanced flames
Stelzner, B.; Hunger, F.; Voss, S.; Hasse, C.; Trimis, D.
2013. Abstract book / 6th European Combustion Meeting ; ECM 2013 : Lund, Sweden, June 25 - 28, 2013, The Combustion Institute
Temperature measurements in oxy-fuel non-premixed combustion using laser-induced fluorescence
Stelzner, B.; Trimis, D.
2013. 5th GERG Research Academic Network in Conjunction with EGATEC 2013 – Paris, France, 30.-31. May 2013
Temperature measurements in oxy-fuel non-premixed combustion using laser-induced fluorescence
Stelzner, B.; Voss, S.; Trimis, D.
2013. GRC: Laser Diagnostics in Combustion 2013, Waterville, N.H., USA
Modelling of conduction–radiation in a porous medium with blocked-off region approach
Talukdar, P.; Mendes, M. A. A.; Parida, R. K.; Trimis, D.; Ray, S.
2013. International journal of thermal sciences, 72, 102–114. doi:10.1016/j.ijthermalsci.2013.04.027
A simple and efficient method for the evaluation of effective thermal conductivity of open-cell foam-like structures
Mendes, M. A. A.; Ray, S.; Trimis, D.
2013. International journal of heat and mass transfer, 66, 412–422. doi:10.1016/j.ijheatmasstransfer.2013.07.032
Catalytic partial oxidation of methane rich mixtures in non-adiabatic monolith reactors
Navalho, J. E. P.; Frenzel, I.; Loukou, A.; Pereira, J. M. C.; Trimis, D.; Pereira, J. C. F.
2013. International journal of hydrogen energy, 38 (17), 6989–7006. doi:10.1016/j.ijhydene.2013.02.141
Flamelet-Modeling of Inverse Rich Diffusion Flames
Hunger, F.; Stelzner, B.; Trimis, D.; Hasse, C.
2013. Flow, Turbulence and Combustion, 90 (4), 833–857. doi:10.1007/s10494-012-9422-z
Experimental and numerical study of rich inverse diffusion flame structure
Stelzner, B.; Hunger, F.; Voss, S.; Keller, J.; Hasse, C.; Trimis, D.
2013. Proceedings of the Combustion Institute, 34 (1), 1045–1055. doi:10.1016/j.proci.2012.06.153
CFD Modeling of Radiation Effects in a Partial Oxidation Flame Including Optically Thin and Dense Regions
Hunger, F.; Garten, B.; Messig, D.; Stelzner, B.; Hasse, C.; Trimis, D.
2013. 14th International Conference on Numerical Combustion, San Antonio, Texas/USA, April 8-10, 2013
Development of an inverse diffusion partial oxidation flame and model burner contributing to the development of 3rd generation coal gasifiers
Stelzner, B.; Hunger, F.; Laugwitz, A.; Gräbner, M.; Voss, S.; Uebel, K.; Schurz, M.; Schimpke, R.; Weise, S.; Trimis, D.; Hasse, C.; Meyer, B.
2013. Fuel Processing Technology, 110 (January), 33–45. doi:10.1016/j.fuproc.2013.01.005
2012
Neue Rekuperatorbrenner für Industriefeuerungen - Das EU-Projekt CEREXPRo
Uhlig, V.; Trimis, D.; Eder, R.; Ray, S.; Wittenschläger, T.
2012. Freiberger Forschungsforum, Freiberg, Germany, 2012 [Konferenz]
Entwicklung von SiC-Bauteilen mit stark strukturierten Oberflächen zur Steigerung des Wärmeübergangs
Eder, R.; Uhlig, V.; Trimis, D.
2012. DKG-Fachausschuss Wärmetechnik, Freiberg, Germany, 2012 [Konferenz]
Betriebserfahrungen mit einem 500 kW - Diesel ATR-Reformer für eine Schmelzkarbonatbrennstoffzelle
Herrmann, A.; Schulz, B.; Schneider, T.; Trimis, D.
2012. Jahrestreffen der Fachgruppen Energieverfahrenstechnik & Hochtemperaturtechnik, Frankfurt, 7.-9. März 2012
Measurement and Numerical Evaluation of Effective Thermal Conductivity of FeCrAl-alloy Open Cell Metal Foams
Skibina, V.; Mendes, M. A. A.; Ray, S.; Wulf, R.; Al-Zoubi, A.; Trimis, D.; Gross, U.
2012. CELLMAT 2012 - Proceedings of the Conference on Cellular Materials, Dresden, November 7-9, 2012, 1 CD-ROM, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Planungs- und Betriebserfahrungen mit einem 500 kW - Diesel ATR-Reformer für eine Schmelzkarbonatbrennstoffzelle
Herrmann, A.; Schulz, B.; Schneider, T.; Trimis, D.
2012. 7. Öl-Wärme-­Kolloquium, Aachen, 26.-27. September 2012
Auswirkungen des Klimawandels auf Energieerzeugungstechnologien
Herrmann, A.; Lampadius, B.; Matschullat, J.; Trimis, D.
2012. 9. Deutsche Klimatagung, Freiburg, 9.-12. Oktober 2012
Entwicklungen zur Steigerung des Wärmeübergangs an keramischen Rekuperatoren
Eder, R.; Uhlig, V.; Trimis, D.; Ray, S.; Wittenschläger, T.
2012. 7. Öl-Wärme-­Kolloquium, Aachen, 26.-27. September 2012
Experimental characterization of a two-stage burner for conversion of gases with strongly varying calorific value
Frenzel, I.; Loukou, A.; Trimis, D.
2012. 34th International Symposium on Combustion, Warsaw, Poland, July 29 - August 3, 2012
Anaerobic digestion treatment of food waste ground by means of a food waste disposer and intercepted by a filtering tank
Paraboschi, A.; Frenzel, I.; Ferchau, E.; Trimis, D.
2012. 4th International Symposium on Energy from Biomass and Waste, Venice, Italy, November 12-15, 2012
An innovative burner for the conversion of anode off-gases from high temperature fuel cell systems
Frenzel, I.; Loukou, A.; Lohöfener, B.; Trimis, D.
2012. 10th European SOFC Forum, Lucerne, Switzerland, June 26-29, 2012
Numerical Solution of Mass Flow Rate Controlled, Fully Developed, Unsteady, Turbulent Pipe Flows
Ray, S.; Werzner, E.; Trimis, D.
2012. 7th International Symposium on Turbulence, Heat and Mass Transfer (THMT’12), Palermo, Italy, September 24-27, 2012
Towards Development of a Transfer Function between Flow Rate and Pressure Gradient for Turbulent Pulsating Pipe Flow
Werzner, E.; Ray, S.; Trimis, D.
2012. 7th International Symposium on Turbulence, Heat and Mass Transfer (THMT’12), Palermo, Italy, September 24-27, 2012
Liquid metal filtration - new approaches
Peuker, U. A.; Aneziris, C. G.; Trimis, D.
2012. Nachrichten aus der Chemie, 59 (11). doi:10.1002/nadc.201190117
Investigation on the thermal flame thickness for lean premixed combustion of low calorific H2/CO mixtures within porous inert media
Voss, S.; Mendes, M. A. A.; Pereira, J. M. C.; Ray, S.; Pereira, J. C. F.; Trimis, D.
2012. 34th International Symposium on Combustion, Warsaw, Poland, July 29 - August 3, 2012
Rayleigh imaging of mixing in partially premixed jets
Collin, C.; Voss, S.; Juddoo, M.; Trimis, D.; Masri, A. R.
2012. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 9-12, 2012, Instituto Superior Tecnico
Einsatz von GoGas IR-Strahlern bei der Trocknung von mit lösemittelhaltigem Lack beschichteten Stahlbändern
Anger, S.; Frenzel, I.; Trimis, D.; Schneider, H.
2012. 19. Innovationstag Mittelstand des Bundesministeriums für Wirtschaft und Technologie (BMWi), Berlin, 14. Juni 2012
Entwicklung eines SuperCriticalWater-Reformers (SCW-Reformer) zur Erzeugung von Brenn- bzw. Synthesegas aus (Roh-)Glyzerin und anderen flüssigen organischen Energieträgern
Makhynya, Y.; Anger, S.; Haep, S.; Trimis, D.
2012. 18. Internationale Fachtagung ’Energetische Nutzung nachwachsender Rohstoffe’, Freiberg, 13.-14. September 2012
Lösemitteldämpfe als Primärbrennstoff in einem alternativen Verfahren zur Trocknung von beschichteten Stahlbändern unter Einsatz von Porenstrahlern
Anger, S.; Frenzel, I.; Trimis, D.; Schneider, H.
2012. 7. Öl-Wärme-­Kolloquium, Aachen, 26.-27. September 2012
Potenzial zur Erhöhung der Wirkungsgrade bei der Rückverstromung im Power-to-Gas-Konzept
Trimis, D.; Anger, S.
2012. Gasfachliche Aussprachetagung (GAT’12), Dresden, 25.-26. September 2012 [Konferenz]
Untersuchungen zur Dampfreformierung von Flüssiggas (LPG) für Niedertemperatur-PEM-Brennstoffzellen
Anger, S.; Nitzsche, J.; Trimis, D.; Krause, H.
2012. 1. Sächsisches Forum für Brennstoffzellen und Energiespeicher, Leipzig, 23. Oktober 2012 [Konferenz]
Wirkungsgradvergleich verschiedener P2G-Verschaltungsszenarien unter Einsatz von Hochtemperaturelektrolyse und Methanisierung
Anger, S.; Frenzel, I.; Trimis, D.; Posdziech, O.; Rüger, D.; Olshausen, C. von
2012. 1. Sächsisches Forum für Brennstoffzellen und Energiespeicher, Leipzig, 23. Oktober 2012 [Konferenz]
Experimental and numerical study of rich inverse diffusion flame structure
Stelzner, B.; Hunger, F.; Voss, S.; Keller, J.; Hasse, C.; Trimis, D.
2012. 34th International Symposium on Combustion, Warsaw, Poland, July 29 - August 3, 2012
Numerical Study of the Effective Thermal Conductivity of Refractory Materials
Zehmisch, R.; Al-Zoubi, A.; Ray, S.; Trimis, D.; Ballani, F.; Van den Boogaart, K. G.
2012. Refractories worldforum, 4, 181–186
Development of an SOFC based Micro-CHP System in the Framework of the European Project FC-DISTRICT
Frenzel, I.; Loukou, A.; Trimis, D.; Schroeter, F.; Mir, L.; Marin, R.; Egilegor, B.; Manzanedo, J.; Raju, G.; De Brujine, M.; Wesseling, R.; Fernandes, S.; Pereira, J. M. C.; Vourliotakis, G.; Founti, M.; Posdziech, O.
2012. Energy Procedia (Special issue: Fuel Cells 2012 - Science & Technology - A Grove Fuel Cell Event, Berlin, April 11-12, 2012 / ISBN: 978-1-62748-438-1), 28, 170–181. doi:10.1016/j.egypro.2012.08.051
Thermally sprayed diffusion barrier coatings on C/C light-weight charging racks for furnace applications
Drehmann, R.; Rupprecht, C.; Wielage, B.; Lampke, T.; Gilbert, M.; Uhlig, V.; Trimis, D.
2012. Surface and Coatings Technology, 214 (January), 144–152. doi:10.1016/j.surfcoat.2012.11.018
Evaluation of heat conduction through truncated conical shells
Ray, S.; Loukou, A.; Trimis, D.
2012. International Journal of Thermal Sciences, 57 (July), 183–191. doi:10.1016/j.ijthermalsci.2012.02.004
Porous burners for low emission combustion: An experimental investigation
Keramiotis, C.; Stelzner, B.; Trimis, D.; Founti, M.
2012. Energy, 45 (1), 213–219. doi:10.1016/j.energy.2011.12.006
Quantification of uncertainty propagation due to input parameters for simple heat transfer problems
Mendes, M. A. A.; Ray, S.; Pereira, J. M. C.; Pereira, J. C. F.; Trimis, D.
2012. International Journal of Thermal Sciences, 60 (October), 94–105. doi:10.1016/j.ijthermalsci.2012.04.020
Investigation on the thermal flame thickness for lean premixed combustion of low calorific H2/CO mixtures within porous inert media
Voss, S.; Mendes, M. A. A.; Pereira, J. M. C.; Ray, S.; Pereira, J. C. F.; Trimis, D.
2012. Proceedings of the Combustion Institute, 34 (2), 3335–3342. doi:10.1016/j.proci.2012.06.044
Überwachung und Prognose der Degradation von Wärmedämmmaterialien in Thermoprozessanlagen
Kreutzmann, D.; Möntmann, D.; Pohland vom Schloß, H.; Lucka, K.; Teneva-Kosseva, G.; Uhlig, V.; Trimis, D.
2012. Chemie - Ingenieur - Technik, 84 (1-2), 54–62. doi:10.1002/cite.201100149
Tribologische Betrachtung moderner Chargiergestelle - Untersuchungen zur Reibung zwischen Lagerstahl und Gestellwerkstoffen
Gilbert, M.; Eder, R.; Uhlig, V.; Trimis, D.
2012. Journal of Heat Treatment and Materials, 67 (1), 79–85. doi:10.3139/105.110128
Dezentrale Wasserstoffproduktion für Brennstoffzellen
Trimis, D.; Anger, S.; Otto, B.; Nitzsche, J.; Grosser, K.; Krause, H.
2012. BWK Energie-Fachmagazin, 64 (1-2), 58–63
Experimental study of hydrogen production and soot particulate matter emissions from methane rich-combustion in inert porous media
Loukou, A.; Frenzel, I.; Klein, J.; Trimis, D.
2012. International Journal of Hydrogen Energy, 37 (21), 16686–16696. doi:10.1016/j.ijhydene.2012.02.041
Degradation von Wärmedämmmaterialien in Hochtemperaturprozessen
Teneva-Kosseva, G.; Uhlig, V.; Trimis, D.; Kreutzmann, D.; Möntmann, D.; Pohland vom Schloß, H.; Lucka, K.; Wübben, P.
2012. Gaswärme international, 58 (3), 57–67
Degradation of thermal insulation in high temperature processes
Teneva-Kosseva, G.; Uhlig, V.; Trimis, D.; Kreutzmann, D.; Möntmann, D.; Pohland vom Schloß, H.; Lucka, K.; Wübben, H.-P.
2012. Heat processing, 10 (3), 91–100
2011
Development of a porous burner unit for glycerine utilization from biodiesel production by Supercritical Water Reforming
Anger, S.; Stelzner, B.; Trimis, D.; Makhynya, Y.; Peil, S.
2011. International Journal of Hydrogen Energy, 36 (13), 7877–7883. doi:10.1016/j.ijhydene.2011.01.058
Preliminary investigation of inverse diffusion flames in the partial oxidation regime
Stelzner, B.; Voss, S.; Uebel, K.; Laugwitz, A.; Hunger, F.; Meyer, B.; Trimis, D.; Hasse, C.
2011. Laser Diagnostics in Combustion, Waterville, New Hampshire/USA, August 14-19, 2011
Prognose der Änderungen des Heiz- und Kühlenergiebedarfs aufgrund des Klimawandels
Herrmann, A.; Trimis, D.
2011. KLIMZUG-Workshop ’Klimasichere Energieversorgung’, Köln, 7. Dezember 2011
Proposed Method for Measurement of Flow Rate in Turbulent Periodic Pipe Flow
Werzner, E.; Ray, S.; Trimis, D.
2011. 13 European Turbulence Conference, Warsaw, Poland, September 12-15, 2011
Operational Experience with a 500kW Class Diesel-Fuel ATR-Reformer Developed for a Molten Carbonate Fuel Cell System
Schulz, B.; Schneider, T.; Herrmann, A.; Trimis, D.
2011. 11th International Conference on Energy for a Clean Environment, Lisbon, Portugal, July 5-8, 2011
Einfluss von Schädigungen in Wärmedämmmaterialien bei Thermoprozess-anlagen auf den Wärmetransport durch die Anlagenwand
Möntmann, D.; Pohland vom Schloss, H.; Lucka, K.; Tenevea-Kosseva, G.; Uhlig, V.; Trimis, D.
2011. Jahrestreffen der ProcessNet-Fachausschüsse ’Gasreinigung’ und ’Hochtemperaturtechnik’, Frankfurt, 17.-18. Februar 2011
Bio-soluble Alkaline Earth Silicate (AES) Wool in High Temperature Applications
Rank, J.; Krasselt, V.; Trimis, D.; Uhlig, V.
2011. 12th Biennal Worldwide Conference on Refractories, Kyoto, Japan, Oktober 30 - November 2, 2011
Flamelet-modelling of inverse rich diffusion flames
Hunger, F.; Stelzner, B.; Trimis, D.; Hasse, C.
2011. 1st ERCOFTAC Conference on Simulation of Multiphase Flows in Gasification and Combustion, Dresden, September 18-21, 2011
Untersuchungen einer inversen Drffusionsmodellflamme zur Charakterisierung von Vergasungsprozessen
Stelzner, B.; Hunger, F.; Voss, S.; Uebel, K.; Laugwitz, A.; Meyer, B.; Trimis, D.; Hasse, C.
2011. 25. Deutscher Flammentag - Verbrennung und Feuerungen - Karlsruhe, 14.-15. September 2011, 487–492, VDI Fachmedien
Untersuchungen zur Flammenausbreitung von Verbrennungsprozessen in porösen inerten Medien
Voss, S.; Mendes, M.; Pereira, J. C. F.; Trimis, D.
2011. 25. Deutscher Flammentag - Verbrennung und Feuerungen - Karlsruhe, 14.-15. September 2011, 313–318, VDI Fachmedien
Operational experience with a 500 kW class diesel-fuel ATR-reformer developed for a molten carbonate fuel cell system
Trimis, D.; Herrmann, A.; Schulz, B.; Schneider, T.
2011. 11th International Conference on Energy for a Clean Environment, Lisbon, Portugal, July 5-8, 2011
An innovative burner concept for the conversion of anode off-gases from high temperature fuel cell systems
Frenzel, I.; Loukou, A.; Trimis, D.
2011. 11th International Conference on Energy for a Clean Environment, Lisbon, Portugal, July 5-8, 2011
Study of the thermal flame thickness and flame front position of lean H2/CO combustion within inert porous media
Voss, S.; Mendes, M.; Pereira, J. C. F.; Trimis, D.
2011. 5th European Combustion Meeting, Cardiff, United Kingdom, June 28 - July 1, 2011
Study on partially premixed hydrogen-air combustion in a cross flow jet configuration
Voss, S.; Werner, M.; Trimis, D.
2011. 5th European Combustion Meeting, Cardiff, United Kingdom, June 28 - July 1, 2011
Preliminary investigation of inverse diffusion flames in the partial oxidation regime
Stelzner, B.; Voss, S.; Uebel, K.; Laugwitz, A.; Hunger, F.; Meyer, B.; Trimis, D.; Hasse, C.
2011. 5th European Combustion Meeting, Cardiff, United Kingdom, June 28 - July 1, 2011
Experimental study of hydrogen production and soot particulate matter emissions from methane rich-combustion in inert porous media
Loukou, A.; Frenzel, I.; Trimis, D.
2011. International Conference on Hydrogen Production (ICH2P’11), Thessaloniki, Greece, June 19-22, 2011
Experimental studies of methane thermal partial oxidation within inert porous media for the development of a natural gas reformer for hydrogen production
Loukou, A.; Trimis, D.
2011. European Gas Technology Conference (EGATEC’11), Copenhagen, Denmark, May 12-13, 2011
Numerical Determination of Effective Thermal Conductivity of Refractory Materials Using Thermal Lattice Boltzmann Method
Al-Zoubi, A.; Zehmisch, R.; Ray, S.; Ballani, F.; Trimis, D.
2011. International Conference on Refractories, Prague, Czech Republic, May 10-11, 2011
Investigation of inverse diffusion flames in the partial oxidation regime for gasification processes
Stelzner, B.; Voss, S.; Uebel, K.; Laugwitz, A.; Meyer, B.; Trimis, D.; Hasse, C.
2011. 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics (GAMM’11), Graz, Österreich, April 18-21, 2011
Innovative natural gas-fired porous burners for industrial high temperature applications
Werschy, M.; Reusse, E.; Trimis, D.; Fleischmann, B.; Gerlach, N.
2011. Proceedings of the 9th European Conference on Industrial Furnaces and Boilers (INFUB’11), Estoril, Portugal, April 26-29, 2011, 1 CD-ROM, Centro de Energia e Tecnologia (CENERTEC)
Entwicklung eines überkritischen Reformers mittlerer Leistung zur Brenngaserzeugung aus Rohglyzerin
Makhynya, Y.; Anger, S.; Peil, S.; Trimis, D.; Bathen, D.; Haep, S.
2011. Jahrestreffen der ProcessNet-Fachausschüsse ’Gasreinigung’ und ’Hochtemperaturtechnik’, Frankfurt, 17.-18. Februar 2011
Neue keramische Wärmeübertrager für rekuperative und regenerative Industriegasbrenner durch textile Urformverfahren
Eder, R.; Isleker, H.; Ray, S.; Trimis, D.
2011. Jahrestreffen der ProcessNet-Fachausschüsse ’Gasreinigung’ und ’Hochtemperaturtechnik’, Frankfurt, 17.-18. Februar 2011
Moderne Chargiergestelle: Untersuchungen zur Reibung zwischen Lagerstahl und Gestellwerkstoffen an einem Hochtemperaturtribometer
Gilbert, M.; Eder, R.; Uhlig, V.; Trimis, D.
2011. 67. Kolloquium für Wärmebehandlung, Werkstofftechnik, Fertigungs- und Verfahrenstechnik, Wiesbaden, 12.-14. Oktober 2011
Calciumsilikat-Wärmedämmstoffe für den Industrie- und Anlagenbau - Teil 1: Biolösliche Faserdämmstoffe - Teil 2: Feuerfeste Wärmedämmplatten
Rank, J.; Uhlig, V.; Trimis, D.; Semrau, H.; Krasselt, V.; Anton, O.; Opsommer, A.
2011. 4. Fachtagung Feuerfest- und Schornsteinbau, Düsseldorf, 28. Juni 2011
Preliminary operational results of a domestic SOFC based micro-CHP system
Voss, S.; Posdziech, O.; Valldorf, J.; Trimis, D.
2011. International Journal of Energy for a Clean Environment, 12 (1-4), 1–13. doi:10.1615/InterJEnerCleanEnv.2012001485
Energieverluste von Industrieöfen infolge durchströmter wanddurchbrechender Strukturen
Eder, R.; Fischer, B.; Uhlig, V.; Trimis, D.; Windsheimer, H.
2011. Prozesswärme - Energieeffizienz in der industriellen Thermoprozesstechnik. Hrsg.: F. Beneke, 258–271, Vulkan-Verlag
Proposed Method for Measurement of Flow Rate in Turbulent Periodic Pipe Flow
Werzner, E.; Ray, S.; Trimis, D.
2011. Journal of Physics: Conference Series, 318 (2), 022044/1–10. doi:10.1088/1742-6596/318/2/022044
Biogaserzeugung aus Nebenprodukten der RME-Herstellung
Ferchau, E.; Fischer, H.; Krause, H.; Manig, R.; Nitzsche, J.; Protze, C.; Trimis, D.; Wesolowski, S.
2011. GWF: Gas/Erdgas, 152 (9), 524–532
Experimental analysis of soot abatement in reducing syngas for high temperature fuel cell feeding
Raimondi, A.; Loukou, A.; Fino, A.; Trimis, D.
2011. Chemical Engineering Journal, 176-177 (December), 295–301. doi:10.1016/j.cej.2011.05.112
Premixed hydrogen-air combustion system for fuel cell systems
Voss, S.; Steinbrück, R.; Kautz, M.; Schießwohl, E.; Arendt, M.; Felde, J. T.; Volkert, J.; Trimis, D.
2011. International Journal of Hydrogen Energy, 36 (5), 3697–3703. doi:10.1016/j.ijhydene.2010.12.070
New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners
Trimis, D.; Uhlig, V.; Eder, R.; Ortona, A.; Pusterla, S.; Ambrosio, E.; Fino, P.; Rumeau, P.; Chazelas, C.; Gianella, S.; Wünning, J. G.; Altena, H.; Beneke, F.; Debier, M.; Grämer, T.
2011. Heat processing, 9 (2), 183–187
Neuartige keramische Wärmeübertrager für Rekuperatorgasbrenner
Trimis, D.; Uhlig, V.; Eder, R.; Ortona, A.; Pusterla, S.; Paola-Ambrosio, E.; Fino, P.; Chazelas, C.; Gianella, S.; Wünning, G.; Grämer, T.; Debier, M.
2011. Gaswärme international, 57 (5), 381–386
2010
Entwicklung eines Fuel Processing Modules zur Bereitstellung von Synthesegas für den maritimen Betrieb einer MCFC-Brennstoffzelle
Schulz, B.; Schneider, T.; Herrmann, A.; Trimis, D.
2010. 3. Sächsischer Brennstoffzellentag, Freiberg, 9. Dezember 2010 [Konferenz]
Experimenal study on soot particulate emissions from premixed fuel-rich combustion of methane in porous media
Loukou, A.; Frenzel, I.; Trimis, D.
2010. 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 5-8, 2010, 1–11
Auslegung eines Mehrstoffbrenners für die Umsetzung von Abfällen der Biodieselproduktion mit überkritischem Wasser
Anger, S.; Makhynya, Y.; Peil, S.; Trimis, D.; Haep, S.
2010. Jahrestreffen der ProcessNet-Fachausschüsse ’Abfallbehandlung, Wertstoffrückgewinnung und Hochtemperaturtechnik’, Magdeburg, 17.-19. Februar 2010
Sicherer Einsatz biolöslicherer Wollen in Thermoprozessanlagen
Rank, J.; Uhlig, V.; Trimis, D.
2010. Jahrestreffen der ProcessNet-Fachausschüsse ’Abfallbehandlung, Wertstoffrückgewinnung und Hochtemperaturtechnik’, Magdeburg, 17.-19. Februar 2010
Pulsating Turbulent Flow Through Circular Ducts
Ray, S.; Werzner, E.; Trimis, D.
2010. 37th National and 4th International Conference on Fluid Mechanics and Fluid Power, Chennai, India, December 16-18, 2010
Laminar Natural Convection Heat Transfer From a Heated Cylinder in a Vertical Channel
Ray, S.; Isleker, H.; Al-Zoubi, A.; Trimis, D.
2010. 37th National and 4th International Conference on Fluid Mechanics and Fluid Power, Chennai, India, December 16-18, 2010
Turbulent Pulsating Flow Through Circular Ducts
Werzner, E.; Ray, S.; Trimis, D.
2010. 8th European Fluid Mechanics Conference (EFMC’10), Bad Reichenhall, September 13-16, 2010
Low Reynolds Number Simultaneously Developing Flow Through Pipes
Wittenschlaeger, T.; Ray, S.; Al-Zoubi, A.; Trimis, D.
2010. 8th European Fluid Mechanics Conference (EFMC’10), Bad Reichenhall, September 13-16, 2010
Laminar Natural Convection Heat Transfer From an Elliptic Cylinder in a Vertical Channel
Isleker, H.; Ray, S.; Al-Zoubi, A.; Trimis, D.
2010. 8th European Fluid Mechanics Conference (EFMC’10), Bad Reichenhall, September 13-16, 2010
Heat Transfer Augmentation In Parallel Plate Channel Using Staggered Arrays of Wire-Loop Structures
Isleker, H.; Ray, S.; Al-Zoubi, A.; Trimis, D.
2010. 8th European Fluid Mechanics Conference (EFMC’10), Bad Reichenhall, September 13-16, 2010
Dropwise Condensation In The Presence Of Non-Condensable Gas: Modelling and Parametric Study
Al-Zoubi, A.; Ray, S.; Trimis, D.
2010. 8th European Fluid Mechanics Conference (EFMC’10), Bad Reichenhall, September 13-16, 2010
Study on partially premixed hydrogen-air combustion on the basis of cross flow jets
Voss, S.; Trimis, D.
2010. 33rd International Symposium on Combustion, Beijing, China, August 1-6, 2010
Experimental Study of the Flame Structure inside a Porous Inert Medium Burner using Planar Laser Induced Fluorescence
Stelzner, B.; Keramiotis, C. N.; Boss, S.; Werner, M.; Founti, M. A.; Trimis, D.
2010. 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 5-8, 2010
Innovative natural gas-fired porous burners for high temperature applications, possibilities for reduced energy consumption and reduced emissions
Reusse, E.; Trimis, D.
2010. 8th International Symposium on High Temperature Air Combustion and Gasification (HiTACG’10), Poznan, Poland, July 5-7, 2010
Development of ethanol-fuel/off-gas porous hybrid-burner
Stelzner, B.; Al-Zoubi, A.; Al-Sha’arawi, A.; Ray, S.; Trimis, D.
2010. 8th International Symposium on High Temperature Air Combustion and Gasification (HiTACG’10), Poznan, Poland, July 5-7, 2010
Combustion of ultra-lean H2/CO mixtures in a compact inert porous media burner
Voss, S.; Trimis, D.
2010. 8th International Symposium on High Temperature Air Combustion and Gasification (HiTACG’10), Poznan, Poland, July 5-7, 2010
Untersuchungen zu den Einsatzgrenzen biolöslicherer Wollen in Thermoprozessanlagen
Rank, J.; Uhlig, V.; Walter, G.; Trimis, D.
2010. Freiberger Forschungsforum und 61. Berg- und Hüttenmännischer Tag (BHT’10), Freiberg, 9.-11. Juni 2010
Conduction Heat Transfer in a Truncated Conical Shell
Ray, S.; Loukou, A.; Trimis, D.
2010. 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, Bombay, India, January 4-6, 2010. Ed.: K. N. Iyer, 1 CD-ROM, The American Society of Mechanical Engineers (ASME)
Development of a Fuel Flexible, Air-regulated, Modular, and Electrically Integrated SOFC-System (FlameSOFC)
Trimis, D.; Voss, S.
2010. 18th World Hydrogen Energy Conference (WHEC’10), Essen, May 16-21, 2010
Entwicklung einer SCWR-Anlage mittlerer Leistung zur Wasserstofferzeugung aus Rohglyzerin
Makhynya, Y.; Anger, S.; Peil, S.; Trimis, D.; Bathen, D.
2010. 28. DECHEMA-Jahrestagung der Biotechnologen und ProcessNet-Jahrestagung, Aachen, 21.-23. September 2010
Neue Reformerentwicklung für das Brennstoffzellen-Heizgerät inhouse5000
Otto, B.; Nitzsche, J.; Krause, H.; Trimis, D.; Anger, S.; Steinbrück, R.
2010. Freiberger Forschungsforum und 61. Berg- und Hüttenmännischer Tag (BHT’11), Freiberg, 9.-11. Juni 2010
Porenbrennerentwicklung für industrielle Hochtemperaturprozesse der Glasindustrie
Reuße, E.; Werschy, M.; Trimis, D.
2010. Freiberger Forschungsforum und 61. Berg- und Hüttenmännischer Tag (BHT’10), Freiberg, 9.-11. Juni 2010
Innovative natural gas-fired porous burners for high temperature applications and potentials for reduced energy consumption and reduced emissions
Reuße, E.; Trimis, D.
2010. European Gas Research Group Academic Network Event, Brussels, Belgium, June 3-4, 2010
CO and NOx emissions in porous inert media (PIM) burner system operated under elevated pressure and inlet temperature using a new flame stabilization technique
Bakry, A.; Al-Salaymeh, A.; Al-Muhtaseb, A. H.; Abu-Jrai, A.; Trimis, D.
2010. Chemical Engineering Journal, 165 (2), 589–596. doi:10.1016/j.cej.2010.09.077
Quasi-1D and 3D TPOX porous media diffuser reformer model
Pereira, J. M. C.; Mendesa, M. A. A.; Trimis, D.; Pereira, J. C. F.
2010. Fuel, 89 (8), 1928–1935. doi:10.1016/j.fuel.2010.01.011
Sicherer Einsatz biolöslicher Faserdämmstoffe in Atmosphären von Thermoprozessanlagen
Rank, J.; Uhlig, V.; Trimis, D.; Semrau, H.
2010. Gaswärme international, 59 (6), 460–466
Energieverluste von Industrieöfen infolge durchströmter wanddurchbrechender Strukturen
Eder, R.; Fischer, B.; Uhlig, V.; Trimis, D.; Windsheimer, H.
2010. Gaswärme international, 2010 (3), 155–163
Numerical investigation of the partial oxidation process in porous media based reformer
Al-Hamamre, Z.; Al-Zoubi, A.; Trimis, D.
2010. Combustion Theory and Modelling, 14 (1), 91–103. doi:10.1080/13647830903548842
Low-Emission Premixed Porous Inert Media (PIM) Burner System Fueled with Vegetable (Rapeseed) Oil Using a Flow Velocity Flame Stabilization Technique
Bakry, A.; Al-Salaymeh, A.; Al-Muhtaseb, A. H.; Abu-Jrai, A.; Trimis, D.; Durst, F.
2010. Energy & Fuels, 24 (1), 288–294. doi:10.1021/ef9007888
Optimization of gas processing in a high Temperature PEMFC Combined Heat and power plant on the basis of the Numerical Pinch Method
Anger, S.; Nitzsche, J.; Krause, H.; Trimis, D.
2010. International Journal of Energy for a Clean Environment, 11 (1-4), 1–10. doi:10.1615/InterJEnerCleanEnv.2011001404
2009
Investigation of design parameters influencing the performance of premixed surface burners
Zbogar-Rasic, A.; Altendorfner, M.; Steven, M.; Issendorff, F.; Trimis, D.
2009. International journal on energy for a clean environment, 10 (1-4), 135–146. doi:10.1615/InterJEnerCleanEnv.v10.i1-4.80
Korrosion von Siliziumcarbidmaterialien in Prozessatmosphären
Trimis, D.; Uhlig, V.; Otto, S.
2009. Jahrestreffen der Fachausschüsse ’Hochtemperaturtechnik und Energieverfahrenstechnik’, Hamburg, 10.-12. März 2009
Hochtemperaturwärmedämmmaterialien in wasserstoffhaltigen Atmosphären
Rank, J.; Wulf, R.; Walter, G.; Trimis, D.
2009. Jahrestreffen der Fachausschüsse ’Hochtemperaturtechnik und Energieverfahrenstechnik’, Hamburg, 10.-12. März 2009
Development of a porous burner unit for glycerine utilization from biodiesel production by Supercritical Water Reforming
Anger, S.; Stelzner, B.; Trimis, D.; Makhynya, Y.; Peil, S.
2009. World Congress of Young Scientists on Hydrogen Energy Systems (Hysydays’09), Turin, Italy, October 7-9, 2009
Entwicklung eines Fuel Processing Modules zur Bereitstellung von Synthesegas für den maritimen Betrieb einer MCFC-Brennstoffzelle
Schulz, B.; Trimis, D.
2009. 6. Aachener Ölwärme-Kolloquium - Hamburg, 16.-17. September 2009. Hrsg.: H. Köhne, 264–280, Shaker Verlag
Anlage mit Luftkissentransport zur kontaktfreien Erwärmung von Glasscheiben
Strack, J.; Uhlig, V.; Hennig, M.; Trimis, D.
2009. 83. Glastechnische Tagung der Deutschen Glastechnischen Gesellschaft e.V. (DGG), Amberg, 18.-20. Mai 2009
Energieeinsparung und Qualitätsverbesserung in der Glasindustrie durch innovative Heiztechniken
Reusse, E.; Trimis, D.
2009. 6. Aachener Ölwärme-Kolloquium - Hamburg, 16.-17. September 2009. Hrsg.: H. Köhne, 256–263, Shaker Verlag
Overview of Development Status and Operation of a PEM Fuel Cell System for low Emission Energie supply for houses
Steinbrück, R.; Grosser, K.; Hildebrandt, C.; Krause, H.; Nitzsche, J.; Trimis, D.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
Optimization of gas processing in a high Temperature PEMFC Combined Heat and power plant on the basis of the Numerical Pinch Method
Anger, S.; Nitzsche, J.; Krause, H.; Trimis, D.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
Development of Ethanol-fuel porous Burner for Application in a HT-PEM-Fuel cell system
Stelzner, B.; Al-Zoubi, A.; Al-Sha’arawi, A.; Löbel, C.; Ray, S.; Trimis, D.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
An innovative hydrocarbon Fuel Processing Unit on the Basis of combined Operation of a thermal partial oxidation Reformer and a self-regenerable soot particle filter
Loukou, A.; Raimondi, A.; Trimis, D.; Saracco, G.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
Development of a Fuel Flexible, air regulated, modular and electrically integrated micro-CHP SOFC based system (FlameSOFC)
Loukou, A.; Voss, S.; Trimis, D.; Valldorf, J.
2009. 11th Grove Fuel Cell Symposium, London, United Kingdom, September 22-24, 2009, 11–18, Forschungszentrum Jülich
An overview of the EU Project FlameSOFC - Development of a Fuel Flexible, Air-regulated, Modular, and Electrically Integrated SOFC-System
Trimis, D.; Voss, S.; Posdziech, O.; Valldorf, J.
2009. 6. Aachener Ölwärme-Kolloquium - Hamburg, 16.-17. September 2009. Hrsg.: H. Köhne, 161–169, Shaker Verlag
Untersuchungen zur vorgemischten Wasserstoffverbrennung - Anwendung einer kombinierten Flammensperr- und Mischeinrichtung zur Stabilisierung von Wasserstoff-Luftgemischen
Voss, S.; Trimis, D.
2009. Verbrennung und Feuerung: 24. Deutscher Flammentag; Tagung Bochum, 16. und 17. September 2009, 499–502, VDI Verlag
Investigation of OH radical distribution of lean premixed hydrogen-air combustion within a widely modulating combustion system
Trimis, D.; Voss, S.
2009. Laser Diagnostics in Combustion, Waterville, New Hampshire/USA, August 16-21, 2009 [Konferenz]
Preliminary Operational Results of a SOFC-Based micro-CHP System within the Framework of the EU Project FlameSOFC
Posdziech, O.; Kluge, S.; Voss, S.; Trimis, D.
2009. International Fuel Cell Conference with Exhibition, Lucernce, Switzerland, June 29 - July 2, 2009 [Konferenz]
Investigation of a combined flame trap- and mixing system as surface burner support for lean hydrogen-air combustion
Trimis, D.; Voss, S.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
Operational Results of a SOFC-based micro-CHP System within the Framework of the European Project FlameSOFC
Voss, S.; Trimis, D.; Valldorf, J.; Posdziech, O.
2009. 3rd European Fuell Cell Technology & Applications Conference, Rome, Italy, December 15-18, 2009. Ed.: V. Cigolotti, 189–190, Italian National Agency for New Technologies (ENEA)
Preliminary Operational Results of a domestic SOFC Based micro-CHP System
Trimis, D.; Voss, S.; Posdziech, O.; Valldorf, J.
2009. 10th International Conference on Energy for a Clean Environment, Lisboa, Portugal, July 7-10, 2009 [Konferenz]
Development of BoP Components for High Temperature Fuel Cell Systems
Voss, S.; Loukou, A.; Trimis, D.
2009. International Fuel Cell Conference with Exhibition, Lucernce, Switzerland, June 29 - July 2, 2009 [Konferenz]
Übersicht über die Entwicklung eines SOFC basierten mikro-KWK Systems - EU Projekt FlameSOFC
Voss, S.; Trimis, D.
2009. Freiberger Forschungsforum und 60. Berg- und Hüttenmännischer Tag (BHT’09), Freiberg, 17.-19. Juni 2009 [Präsentation]
Combined numericla and experimental study on heat exchangers with dimpled channels
Ray, S.; Schulz, B.; Al-Zoubi, A.; Voss, S.; Trimis, D.
2009. International Conference on Energy Engineering (ICEE’09), Pondicherry, India, January 7-9, 2009 [Konferenz]
Parametric Experimental Investigation of a small scale packed bed reactor for thermal partial oxidation
Loukou, A.; Voss, S.; Mendes, M.; Raimondi, A.; Trimis, D.
2009. 4th European Combustion Meeting, Vienna, Austria, April 14-17, 2009, 1–4, Universität Wien
Comparison of Experimental and Numerical Results of Ultra-Lean H2/CO Combustion within Inert Porous Media
Voss, S.; Mendes, M.; Pereira, J. C.; Trimis, D.
2009. 4th European Combustion Meeting, Vienna, Austria, April 14-17, 2009, 1–5, Universität Wien
Development and Investigations of a compact, wide modulating hydrogen air premixed combustion system for HT-PEM systems
Voss, S.; Schießwohl, E.; Steinbrück, R.; Turner, H.; Felde, T.; Volkert, J.; Trimis, D.
2009. 4th European Combustion Meeting, Vienna, Austria, April 14-17, 2009, 1–3, Universität Wien
Investigation of the intermediate oxidation regime of Diesel fuel
Al-Hamamre, Z.; Trimis, D.
2009. Combustion and flame, 156 (9), 1791–1798. doi:10.1016/j.combustflame.2009.03.008
Hydrogen production by thermal partial oxidation of hydrocarbon fuels in porous media based reformer
Al-Hamamre, Z.; Voss, S.; Trimis, D.
2009. International journal of hydrogen energy, 34 (2), 827–832. doi:10.1016/j.ijhydene.2008.10.085
2008
Detailed kinetic modelling of the T-POX reforming process using a reactor network approach
Vourliotakis, G.; Skevis, G.; Founti, M. A.; Al-Hamamre, Z.; Trimis, D.
2008. International journal of hydrogen energy, 33 (11), 2816–2825. doi:10.1016/j.ijhydene.2008.03.026
Modulating hydrogen combustion system based on a porous media burner for HT-PEM systems
Voss, S.; Kautz, M.; Steinbrück, R.; Schiesswohl, E.; Turner, H.; Felde, J. T.; Volkert, J.; Trimis, D.
2008. 17th World Hydrogen Energy Conference 2008, WHEC 2008, 787–793
Experimental and numerical investigations of a porous burner for combustion of different low and medium - Calorific value gases
Voß, S.; Loukou, A.; Trimis, D.
2008. International Gas Research Conference Proceedings, 3217–3234
Conduction-radiation interaction in 3D irregular enclosures using the finite volume method
Talukdar, P.; Issendorff, F. V.; Trimis, D.; Simonson, C. J.
2008. Heat and mass transfer, 44, 695–704. doi:10.1007/s00231-007-0303-2
Bioethanol für dezentrale KWK - Technische Aspekte im InnoNet-Projekt Regenerative Heizzentrale
Kautz, M.; Stelzner, B.; Trimis, D.
2008. 17. Symposium "BIOENERGIE" Festbrennstoffe, Biokraftstoffe, Biogas
2007
Experimental and numerical optimization of the burner mantel design of the premixed household burners
Zbogar-Rasic, A.; Steven, M.; Issendorff, F. V.; Trimis, D.
2007. VDI-Berichte, 681–686
"InnoGlas" - Innovative heiztechniken zur energieeinsparung und qualitätsverbesserung in der glasindustrie ["InnoGlas" - Innovative heating technologies for minimized energy consumption and quality improvement in glass industry]
Trimis, D.; Aneziris, C. G.; Hessenkemper, H.; Issendorff, F. V.; Werschy, M.; Fleischmann, B.; Volkert, J.; Franke, M.; Zimmermann, H.; Rebmann, A.; Liphardt, K.; Schnelle, J.; Käs, W.; Donaubauer, B.
2007. Gaswärme international, 56 (6), 429–433
Method for defined mass flow variations in time and its application to test a mass flow rate meter for pulsating flows
Durst, F.; Ünsal, B.; Ray, S.; Trimis, D.
2007. Measurement science and technology, 18, 790–802. doi:10.1088/0957-0233/18/3/031
Detailed Experimental and Numerical Investigation of the Partial Oxidation of Methane in a Porous Reactor
Al-Hamamre, Z.; Voß, S.; Trimis, D.
2007. 3rd European Combustion Meeting, ECM 2007. Proceedings
2006
Theoretical and numerical investigation of flow stability in porous materials applied as volumetric solar receivers
Becker, M.; Fend, T.; Hoffschmidt, B.; Pitz-Paal, R.; Reutter, O.; Stamatov, V.; Steven, M.; Trimis, D.
2006. Solar energy, 80 (10), 1241–1248. doi:10.1016/j.solener.2005.11.006
Combustion of low calorific gases from landfills and waste pyrolysis using porous medium burner technology
Al-Hamamre, Z.; Diezinger, S.; Talukdar, P.; Issendorff, F. V.; Trimis, D.
2006. Process safety and environmental protection, 84 (4), 297–308. doi:10.1205/psep.05167
Efficiency enhancement in gasoline reforming through the recirculation of reformate
Schäfer, J.; Sommer, M.; Diezinger, S.; Trimis, D.; Durst, F.
2006. Journal of power sources, 154 (2), 428–436. doi:10.1016/j.jpowsour.2005.10.028
Experimental investigation of flame propagation of methane mixture in porous media
Pan, H.-L.; Pickenäcker, O.; Trimis, D.; Durst, F.
2006. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 27 (5), 897–899
Heat transfer analysis of a two-dimensional rectangular porous radiant burner
Mishra, S. C.; Steven, M.; Nemoda, S.; Talukdar, P.; Trimis, D.; Durst, F.
2006. International communications in heat and mass transfer, 33 (4), 467–474. doi:10.1016/j.icheatmasstransfer.2005.12.006
CERPOR - Optimised ceramic components for the porous burner technology
Mach, A.; Herzog, A.; Issendorff, F. V.; Kanka, B.; Krieger, R.; Pritzkow, W.; Schäfer, J.; Schmidt, J.; Schmücker, M.; Schneider, H.; Stark, J.; Trimis, D.; Vogt, U.; Megede, D. Z.
2006. Interceram, 48–54
Thermal partial oxidation of diesel in porous reactors for synthesis gas production
Al-Hamamre, Z.; Deizinger, S.; Mach, A.; Issendorff, F. V.; Trimis, D.
2006. International Journal of Energy for a Clean Environment, 7 (4), 391–407. doi:10.1615/InterJEnerCleanEnv.v7.i4.60
Instantaneous mass flowrate measurements through fuel injection nozzles
Ünsal, B.; Trimis, D.; Durst, F.
2006. International journal of engine research, 7 (5), 371–380. doi:10.1243/14680874jer00506
2005
Finite volume method in 3-D curvilinear coordinates with multiblocking procedure for radiative transport problems
Talkudar, P.; Steven, M.; Issendorf, F. V.; Trimis, D.
2005. International journal of heat and mass transfer, 48 (21-22), 4657–4666. doi:10.1016/j.ijheatmasstransfer.2005.06.001
Two-dimensional transient conduction and radiation heat transfer with temperature dependent thermal conductivity
Mishra, S. C.; Talukdar, P.; Trimis, D.; Durst, F.
2005. International communications in heat and mass transfer, 32 (3-4), 305–314. doi:10.1016/j.icheatmasstransfer.2004.05.015
Entwicklung eines Heizungssystems mit stufenloser Leistungsmodulation für die Anwendung mit Heizöl EL und FAME-Gemischen im Rahmen des Projektes BIOFLAM [Development of a heating system with stageless output modulation for use with fuel oil EL and fatty acid methyl ester (FAME) mixtures within the setting of the BIOFLAM project]
Heeb, A.; Medeiros, A.; Schloß, J. V.; Lucka, K.; Abu-Sharekh, Y.; Issendorff, F. V.; Trimis, D.; Brehmer, T. H.; Heger, F.; Pöz, W.; Hayashi, T.; Pereira, J. C. F.; Founti, M.; Kolaitis, D.; Molinari, M.; Ortona, A.
2005. VDI-Berichte, 1888, 653–658
Verbrennung von niederkalorischen Gasen in Porenbrennern [Combustion of low calorific value gases in porous burners]
Diezinger, S.; Tslukdar, P.; Issendorff, F. V.; Trimis, D.
2005. Gaswärme international, 54 (3), 187–192
Numerische und experimentelle Untersuchung von Verbrennungsvorgängen niederkalorischer Gase in Porenbrennern [Numerical and experimental study of combustion processes]
Diezinger, S.; Steven, M.; Talukdar, P.; Al-Hamamre, Z.; Issendorff, F. V.; Trimis, D.
2005. VDI-Berichte, 1888, 519–524
2004
Heat transfer characteristics of a porous radiant burner under the influence of a 2-D radiation field
Talukdar, P.; Mishra, S. C.; Trimis, D.; Durst, F.
2004. Journal of quantitative spectroscopy & radiative transfer, 84 (4), 527–537. doi:10.1016/S0022-4073(03)00269-3
Combined radiation and convection heat transfer in a porous channel bounded by isothermal parallel plates
Talukdar, P.; Mishra, S. C.; Trimis, D.; Durst, F.
2004. International journal of heat and mass transfer, 47 (5), 1001–1013. doi:10.1016/j.ijheatmasstransfer.2003.09.002
2003
Stabilisierung der Verbrennung in porösen Medien bei starker Stoffdiffusion
Trimis, D.; Wawrzinek, K.
2003. VDI-Berichte, 1750, 595–600
Characterization of pore diameters in highly porous media
Pan, H. L.; Pickenäcker, O.; Trimis, D.
2003. Proceedings of the ASME Summer Heat Transfer Conference, 467–475, The American Society of Mechanical Engineers (ASME). doi:10.1115/HT2003-47342
Wasserstoffproduktion durch thermische partielle Oxidation von Methan im Porenbrenner
Al-Hamamre, Z.; Trimis, D.; Wawrzinek, K.; Diezlnger, S.
2003. VDI-GET Verbrennung und Feuerungen. 21. Deutscher Flammentag, 589–594, VDI-Verlag
2002
Application of the porous burner technology in energy- and heat-engineering
Mößbauer, S.; Pickenäcker, O.; Pickenäcker, K.; Trimis, D.
2002. Clean air, 3 (2), 185–198
Combustion by free flames versus combustion reactors
Durst, F.; Trimis, D.
2002. Clean air, 3 (1), 1–20. doi:10.1080/15614410211844
2001
Improved-performance knitted fibre mats as supports for pre-mixed natural gas catalytic combustion
Cerri, I.; Saracco, G.; Specchia, V.; Trimis, D.
2001. The chemical engineering journal, 82 (1-3), 73–85. doi:10.1016/S1385-8947(00)00344-2
Experimental and numerical study of applicability of porous combustors for HCl synthesis
Wawrzinek, K.; Kesting, A.; Künzel, J.; Pickenäcker, K.; Pickenäcker, O.; Trimis, D.; Franz, M.; Härtel, G.
2001. Catalysis today, 69 (1-4), 393–397. doi:10.1016/S0920-5861(01)00397-2
Porenbrenner für flüssige Brennstoffe mit Gemischbildung durch kalte Flammen [Porous burner for liquid fuels with cold flame vaporizer]
Trimis, D.; Wawrzinek, K.; Hatzfeld, O.; Lucka, K.; Rudolphi, I.; Rutsche, A.; Haase, F.; Krüger, K.; Küchen, C.
2001. VDI-Berichte, 1643, 55–72
Développement d’un chauffage-infrarouge au gas à haute efficacité, basé sur la combustion dans des médias poreux inertes [Development of a highly efficient gas infrared heater by means of combustion in inert porous media]
Kesting, A.; Pickenäcker, K.; Trimis, D.; Cerri, I.; Krieger, R.; Schneider, H.
2001. International Gas Research Conference Proceedings, Art.-Nr.: 62343
2000
Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media
Brenner, G.; Pickenäcker, K.; Pickenäcker, O.; Trimis, D.; Wawrzinek, K.; Weber, T.
2000. Combustion and flame, 123 (1-2), 201–213. doi:10.1016/S0010-2180(00)00163-2
Stabilized combustion in porous media - Applications of the porous burner technology in energy- and heat-engineering
Trimis, D.
2000. Fluids 2000 Conference and Exhibit, American Institute of Aeronautics and Astronautics. doi:10.2514/6.2000-2298
Experimental investigation of matrix-stabilized staged combustion in porous inert media
Pickenacker, O.; Trimis, D.
2000. International Symposium on Combustion Abstracts of Accepted Papers, 406
1999
Neuartige keramische Hochtemperaturbauteile für die Porenbrennertechnik, I [Novel ceramic components for high-temperature applications in porous medium burner technology, I]
Pickenäcker, O.; Pickenäcker, K.; Wawrzinek, K.; Trimis, D.; Pritzkow, W. E. C.; Mueller, C.; Goedtke, P.; Papenburg, U.; Adler, J.; Standke, G.; Heymer, H.; Tauscher, W.; Jansen, F.
1999. Keramische Zeitschrift, 51 (2), 108–117
Neuartige keramische Hochtemperaturbauteile fuer die Porenbrennertechnik, II [Novel ceramic components for high-temperature applications in porous medium burner technology, II]
Pickenäcker, O.; Pickenäcker, K.; Wawrzinek, K.; Trimis, D.; Pritzkow, W. E. C.; Müller, C.; Goedtke, P.; Papenburg, U.; Adler, J.; Standke, G.; Heymer, H.; Tauscher, W.; Jansen, F.
1999. Keramische Zeitschrift, 51 (3), 190–192, 195
Innovative Ceramic Materials for Porous-Medium Burners, II
Pickenäcker, O.; Pickenäcker, K.; Wawrzinek, K.; Trimis, D.; Pritzkow, W. E. C.; Müller, C.; Goedtke, P.; Papenburg, U.; Adler, J.; Standke, G.; Heymer, H.; Tauscher, W.; Jansen, F.
1999. Interceram, 48 (6), 424-X
Luftzahlkontrollierte Verbrennung durch Wobbeindexbestimmung [Air ratio controlled combustion through measurement of the Wobbe number]
Durst, F.; Gla, J.; Pickenäcker, K.; Trimis, D.; Wawrzinek, K.
1999. Gaswärme international, 48 (7), 429–435
1997
Der Porenbrenner - Konzept, technik und anwendungsgebiete [The porous burner - Concept, technique, and fields of application]
Durst, F.; Kesting, A.; Mößbauer, S.; Pickenäcker, K.; Pickenäcker, O.; Trimis, D.
1997. Gaswärme international, 46 (5), 300–307
Methods and tools for advanced fuel spray production and investigation
Brenn, G.; Durst, F.; Trimis, D.; Weclas, M.
1997. Atomization and sprays, 7 (1), 43–75. doi:10.1615/AtomizSpr.v7.i1.30
1996
Combustion in a Porous Medium-Advances and Applications
Trimis, D.; Durst, F.
1996. Combustion Science and Technology, 121 (1-6), 153–168. doi:10.1080/00102209608935592
Measurement of instantaneous flow rates in periodically operating injection systems
Durst, F.; Ismailov, M.; Trimis, D.
1996. Experiments in fluids, 20, 178–188. doi:10.1007/BF00190273
Development of a flow meter for instantaneous flow rate measurements of anaesthetic liquids
Durst, F.; Melling, A.; Trimis, D.; Volkholz, P.
1996. Flow measurement and instrumentation, 7 (3-4), 215–221. doi:10.1016/S0955-5986(96)00018-0
1995
Improved laser doppler anemometry techniques for two-point turbulent flow correlations
Trimis, D.; Melling, A.
1995. Measurement science and technology, 6, 663–673. doi:10.1088/0957-0233/6/6/005
1992
Determination of velocity profiles in oscillating pipe-flows by using laser Doppler velocimetry and ultrasonic measuring devices
Teufel, M.; Trimis, D.; Lohmüller, A.; Takeda, Y.; Durst, F.
1992. Flow measurement and instrumentation, 3 (2), 95–101. doi:10.1016/0955-5986(92)90006-Q