Publikationen

2023

Numerical investigation of an innovative furnace concept for industrial coil coating lines
Barata, B. A. C.; Dias, B. S.; Navalho, J. E. P.; Schneider, M.; Weinbrecht, P.; Weis, C.; Trimis, D.; Pereira, J. C. F.
2023. Thermal Science and Engineering Progress, 42, Art.-Nr.: 101843. doi:10.1016/j.tsep.2023.101843

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames
Weis, C.; Sentko, M.; Stelzner, B.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2023. 4th Oxyflame Workshop

Experimental determination of the laminar burning velocity of methane-oxygen-flames stabilized with cylindrical burners at various preheating temperatures
Schlinger, P.; Jazkow, W.; Habisreuther, P.; Stelzner, B.; Trimis, D.
2023. 11th European Combustion Meeting 2023, 1121–1126

Simulation eines industriellen Brenners zur thermischen Nachverbrennung mit Lösemittel beladener Luft hinsichtlich der Brenngassubstitution von Erdgas durch Wasserstoff
Weis, C.; Habisreuther, P.; Athenstädt, C.; Wahl, E.; Trimis, D.
2023. Jahrestreffen der DECHEMA Fachgruppe Hochtemperaturtechnik

Development of a model burner for turbulent premixed hydrogen-air combustion at high exhaust gas recirculation (EGR) rates
Schneider, M.; Bauer, M.; Schulz, S.; Habisreuther, P.; Weis, C.; Stelzner, B.; Trimis, D.
2023. 31. Deutscher Flammentag (2023), Berlin, Deutschland, 27.–28. September 2023

Investigation of the laminar burning velocity of premixed H2-air flames highly diluted with exhaust gas using the heat-flux burner method
Schneider, M.; Bauer, M.; Habisreuther, P.; Weis, C.; Stelzner, B.; Trimis, D.
2023. Proceedings of the 11th European Combustion Institute Meeting - 2023 Proceedings of the European Combustion Meeting 2023, 1–6. doi:10.5445/IR/1000165131

2022

3D direct pore level simulations of radiant porous burners
Wieland, C.; Weis, C.; Habisreuther, P.; Trimis, D.
2022. Combustion and Flame, 245, Art.-Nr.: 112370. doi:10.1016/j.combustflame.2022.112370

A Pilot Scale Demo Line for Continuous Energy Efficient Coil Coating
Weinbrecht, P.; Schneider, M.; Wieland, C.; Weis, C.; Trimis, D.
2022, September 14. (Bio-)Process Engineering - a Key to Sustainability (2022), Aachen, Deutschland, 12.–15. September 2022

Eine Pilotanlage zur energieeffizienten Stahlbandbeschichtung
Weis, C.; Weinbrecht, P.; Schneider, M.; Wieland, C.; Trimis, D.
2022, März 30. Jahrestreffen der ProcessNet-Fachgruppen "Abfallbehandlung und Wertstoffrückgewinnung, Energieverfahrenstechnik, Gasreinigung, Hochtemperaturtechnik, Rohstoffe" (2022), Bamberg, Deutschland, 30. März–1. April 2022

Experimental investigation of synthesis gas production in fuel-rich oxy-fuel methane flames
Sentko, M. M.; Schulz, S.; Weis, C.; Stelzner, B.; Anderlohr, C.; Vicari, M.; Trimis, D.
2022. Fuel, 317, Art.-Nr.: 123452. doi:10.1016/j.fuel.2022.123452

2021

Combustion Characterization of Solvents used in Coil Coating Processes: Experiments and Kinetic Modelling
Malliotakis, Z.; Weinbrecht, P.; Cameron, F.; Katsourinis, D.; Vourliotakis, G.; Weis, C. G.; Skevis, G.; Trimis, D.; Founti, M.
2021. 10th European Combustion Meeting (ECM 2021), April 14-15, 2021, Virtual Edition. Proceedings Volume, 1361–1366, MCM

Large Eddy Simulation of the Two-Phase Reactive Flow Field in a Single Sector Laboratory Scale Rich-Quench-Lean Combustion Chamber
Kaddar, D.; Langenthal, T. von; Weis, C. G.; Galeazzo, F. C. C.; Habisreuther, P.; Zarzalis, N.
2021. 10th European Combustion Meeting (ECM 2021), April 14-15, 2021, Virtual Edition. Proceedings Volume, 1121–1126, MCM

Detailed Numerical Simulation for Optimization of Radiation Efficiency of Porous Burners
Wieland, C.; Weinbrecht, P.; Weis, C.; Habisreuther, P.; Trimis, D.
2021. 30. Deutscher Flammentag, Deutsche Sektion des Combustion Institutes und DVV/VDI-Gesellschaft Energie und Umwelt Dinkelacker, Friedrich; Pitsch Heinz; Scherer, Viktor (eds.), 1066–1074

2020

Energy Efficient Coil Coating Process - ECCO
Schneider, M.; Weinbrecht, P.; Wieland, C.; Weis, C.; Trimis, D.
2020. 12th European Conference on Industrial Furnaces and Boilers (INFUB-12) : 10th and 11th November 2020

2019

Determination of a correlation for predicting lean blow off limits of gaseous fueled, premixed turbulent jet flame arrays enclosed in a hexagonal dump combustor
Weis, C. G.; Schwagerus, A.; Faller, S.; Bhagwan, R.; Habisreuther, P.; Zarzalis, N.
2019. 9th European Combustion Meeting (ECM), Lissabon, Portugal, 14 - 17 April 2019

Combustion characteristics of natural gas fueled, premixed turbulent jet flame arrays confined in a hexagonal combustor
Bhagwan, R.; Huth, M.; Schwagerus, A.; Koestlin, B.; Weis, C.; Dederichs, S.; Habisreuther, P.; Zarzalis, N.
2019. ASME Conference Proceedings: Turbo Expo: Power for Land, Sea, and Air. Volume 4A: Combustion, Fuels, and Emissions, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2019-90286

Determination of dispersion coefficients of heat and mass for porous media by detailed numerical simulation [in press]
Wieland, C.; Zhou, J.; Weis, C.; Habisreuther, P.; Trimis, D.
2019. Seventeenth International Conference on Numerical Combustion, 06-08 May, Aachen, Germany, MS3–199

Entwicklung einer Pilotstrecke zur Demonstration eines innovativen Ofenkonzeptes für die Stahlbandbeschichtung im Rahmen des europäischen Verbundprojektes: Energy Efficient Coil Coating - ECCO [in press]
Weis, C.; Cameron, F.; Weinbrecht, P.; Trimis, D.
2019. Jahrestreffen der ProcessNet Fachgruppe Hochtemperaturtechnik, KIT Karlsruhe, 2.-3. April 2019, Karlsruher Institut für Technologie (KIT)

Entwicklung eines Porenbrenners mit breitem Leistungsspektrum für niederkalorische, wasserstoffhaltige Gase
Weinbrecht, P.; Wieland, C.; Weis, C.; Stelzner, B.; Trimis, D.
2019. 29. Deutscher Flammentag (2019), Bochum, Deutschland, 17.–18. September 2019

Development of a porous burner for low calorific gaseous fuels offering a wide operating range [in press]
Wieland, C.; Weinbrecht, P.; Weis, C.; Habisreuther, P.; Trimis, D.
2019. Proceedings of the European Combustion Meeting – 2019, April 14-17, Lisboa, Portugal, S3_AIII_53

2017

Super-adiabatic flame temperatures in premixed methane flames: A comparison between oxy-fuel and conventional air combustion
Stelzner, B.; Weis, C.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2017. Fuel. doi:10.1016/j.fuel.2017.01.025

2016

2015

Super-adiabatic flame temperatures in premixed methane-oxygen flames
Stelzner, B.; Weis, C.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2015. Proceedings of the European Combustion Meeting - 2015, March 30-April 2, 2015, Budapest, Hungary : ECM 2015

Bestimmung der laminaren Flammengeschwindigkeit von Methan/Sauerstoff-Gemischen im POX Bereich
Sentko, M. M.; Weis, C.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2015. Verbrennung und Feuerung : 27.Deutscher Flammentag, Clausthal-Zellerfeld, 16.-17.September 2015, 491–500, VDI Verlag

Temperature dependency of the laminar burning velocity of fuel-rich methane oxygen measurements
Sentko, M. M.; Weis, C.; Harth, S.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2015. 7th European Combustion Meeting (ECM2015), Budapest, H, March 30 - April 2, 2015

Numerische Untersuchung von super-adiabaten Flammentemperaturen in vorgemischten Methan-Sauerstoff-Flammen
Stelzner, B.; Weis, C.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2015. Verbrennung und Feuerung : 27.Deutscher Flammentag, Clausthal-Zellerfeld, 16.-17.September 2015, 491–500, VDI Verlag

Super-adiabatic flame temperatures in premixed methane-oxygen flames
Stelzner, B.; Weis, C.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2015. 7th European Combustion Meeting (ECM2015), Budapest, H, March 30 - April 2, 2015

2014

Measurement of laminar burning velocities of fuel-rich methane-oxygen mixtures
Weis, C.; Sentko, M. M.; Habisreuther, P.; Zarzalis, N.; Trimis, D.
2014. 3rd Heat Flux Burner Workshop, Berlin, September 25th, 2014. Innerhalb von: Flame Structure 2014, 8th International Seminar on Flame Structure, 21.-24. Sept. 2014, Berlin